穿刺技术的改进和创新是穴位埋线疗法的第三次飞跃

穴位埋线是长效针灸,是在传统针具和针法基础上建立和发展起来的,是针灸技术的发展和延伸,穴位埋线的核心技术是穿刺技术,穴位埋线的三大要素中,针具、埋藏物、穿刺技巧之间是互相影响、互相促进的。针具的改进成功实现了穴位埋线疗法的第一次飞跃,埋藏物的改进成功实现了穴位埋线疗法的第二次飞跃,穿刺技术的改进和创新是穴位埋线疗法的第三次飞跃。     

直视医学临床见习难——浅析面临困境及其对策

随着社会发展、医学模式的转变，医疗改革和学校扩招政策的实施，传统的临床见习教学遇到了前所未有的冲击与困惑。本文根据临床见习现状进行分析，力求找到最佳的解决方法。     

Characteristics of proton beam scanning dependent on Li target thickness from the viewpoint of heat removal and material strength for accelerator-based BNCT

This study demonstrates the characterization of proton spot scanning on a Li target assembly for accelerator-based BNCT from the viewpoint of heat removal and material strength. These characteristics are investigated as to their dependence on the Li target thickness, considering that the Cu backing plate has more suitable heat removal properties than Li. Two situations are considered in this paper, i.e. the cyclic operation of the spot scanning, and a stalled spot scanning cycle where the proton beam stays focused on a single position on the Li target.It was found that the maximum of the Li temperature and the strain of the Cu backing increase as the cycle period increases. A cycle period less than 120 ms (over 8.3 Hz of frequency) enables the Li temperature to be kept below 150 °C and a cycle of less than 115 ms (8.7 Hz) keeps the Cu strain below the critical value for a 230 μm thick Li target, though the values are evaluated conservatively. Against expectation, the Li temperature and Cu strain are larger for a 100 μm thick target than for a 230 μm target. The required cycle period in this case is 23 ms (43 Hz) for maintaining a reasonable Li temperature and 9 ms (110 Hz) to prevent Cu fatigue fracture.For a stall in the spot scanning cycle, the Cu temperature increases as the beam shutdown time increases. The time for Cu to reach its melting point is estimated to be 4.2 ms at the surface, 20 ms at 1 mm depth, for both of 100 and 230 μm thick targets. At least 34 ms is estimated to be enough to make a hole on Cu backing plate. A beam shutdown mechanism with a response time of about 20 ms is therefore required.     

肿瘤干细胞与肝癌干细胞

肿瘤起源于干细胞的假说正在各种人类肿瘤中得到证实,肿瘤不单是一种基因病,而且是一种干细胞病,基因突变作用于干细胞,干细胞突变成为肿瘤干细胞,这是肿瘤发生、再生、转移和复发的关键。肝细胞癌是最常见的恶性肿瘤之一,其中是否存在“肝癌干细胞”的问题一直倍受人们关注。该文介绍肿瘤干细胞与肝癌干细胞的研究情况。     

胃癌组织中KAI1、nm23及P53的表达及其临床意义

目的:探讨正常胃黏膜、不典型增生胃黏膜及癌组织中KAI1、nm23及P53蛋白的表达．方法:应用SP法免疫组化检测22例正常胃黏膜,65例不典型增生胃黏膜及74N胃癌组织中的KAI1、nm23及P53蛋白的表达．结果:正常胃黏膜、不典型增生胃黏膜及胃癌组织中,KAI1和nm23阳性率呈降低趋势,组间差异性有统计学意义(x2=20．885, P<0．001;x2=29．133,P<0．05):P53蛋白阳性表达率呈增加趋势,组间差异性有统计学意义(x2=21．954,P<0．001)．Fisher精确概率检验显示:在胃癌组中不同的浸润深度、有无淋巴结转移和脉管侵犯组内KAI1、nm23及 P53组阳性表达率的差异性有统计学意义(x2 =20．885,P<0．001;x2=29．133,P<0．05;x2= 21．954,P<0．001);而在年龄、性别组间的差异性无统计学意义．Spearman等级相关分析显示 KAI1与nm23表达呈正相关(r=0．859,P<0．05); KAI1与P53表达呈负相关(r=-0．859,P<0．05), nm23与P53表达呈负相关(r=-0．874,P<0．05) 结论:抑癌基因KAI1与nm23的缺失以及P53 蛋白的过表达可能是胃癌发生、发展及浸润和转移的重要原因之一．